Multifamily Plumbing Contractor in Apex, NC
Plumbing & Mechanical Corp. of NC installs plumbing systems for apartment, townhome, and condominium construction in Apex. We work as a subcontractor to general contractors and developers, carrying a scope from plan review through final trim, inspection, and closeout documentation.
We have been plumbing Triangle projects since 1990 and have completed multifamily scopes from small duplex and triplex buildings up to developments of 100 units and more. Our shop is
in Fuquay-Varina, roughly twenty minutes from most Apex job sites.
Apex currently has one of the deepest residential pipelines in Wake County, and schedules on that kind of work leave little room for a plumbing scope that slips. Send us your drawings and we will return an itemized bid with scope, materials, and timeline.
Multifamily Plumbing Services for Apex Developments
Volume work rewards planning. A routing decision made once gets repeated across every unit in the building, so we start with a full review of your construction documents, assess occupancy demands and utility access points, and settle layout questions before anything goes in the ground.
Our multifamily scope in Apex covers:
- Underground water, sewer, and drain, waste, and vent systems
- Unit rough in and trim out for apartments and townhomes
- Domestic hot water systems, central or unit level
- Backflow prevention assemblies
- Water risers and vent stack routing for multi story buildings
- Fixture setting, pressure and leak testing, and inspection walkthroughs
For main water supply lines we can install Uponor cold expansion PEX-a, which holds full bore flow with less pressure loss across a large building than conventional fittings allow. On developments where pressure balance across upper floors is a concern, it is worth pricing as an option.
Apartment, Townhome, and Condominium Plumbing
Apex development is not one product type, and pricing every building the same way leads to trouble. Garden style apartments, attached townhome rows, and stacked condominium buildings each carry different plumbing logic.
We install plumbing for:
- Garden style apartment buildings
- Townhome and condominium developments
- Duplexes and triplexes
- Senior living and student housing communities
- Affordable housing developments
- Clubhouses, amenity buildings, and leasing offices
Townhome rows need penetrations detailed correctly at every fire rated party wall. Stacked buildings need riser sequencing planned so upper floors are not waiting on the floor below. We price and schedule those differences rather than averaging them.
Fire Sprinklers on Attached Residential Product
On townhome, duplex, and single family attached buildings, we can install the residential fire sprinkler system alongside the plumbing. PMC is certified through the Uponor AquaSAFE Alliance program, Member #3255, for multipurpose systems built under NFPA 13D and IRC P2904.
These systems share the PEX-a domestic water piping rather than running a separate steel network, which means fewer joints and fewer potential leak points. For a developer it also means buying plumbing and sprinkler from one subcontractor instead of coordinating two.
Permitting and Inspections in Apex
We manage the permitting for our scope and schedule the inspections. Apex runs its own Building Inspections and Permitting Department out of 322 N. Mason Street rather than routing work through Wake County, and inspections there are requested the day before with a 3 p.m. cutoff.
That cutoff is worth knowing about when you are building a schedule. A request that misses it costs a full day, and on a phased multi building site those days accumulate quickly.
At closeout you receive inspection records, system documentation where applicable, and warranty information.
Amenity Centers and Mixed Use Spaces in Apex
Most new Apex communities include amenity and commercial square footage, and those spaces rarely follow the residential drawing set. A clubhouse with a catering kitchen, a pool restroom building, or a ground floor retail bay each carry their own fixture counts and grease handling requirements.
We handle:
- Clubhouse and catering kitchen plumbing
- Pool house and pool restroom buildings
- Ground floor retail and service bays in mixed use buildings
- Dog wash stations, package rooms, and maintenance areas
- Leasing office restrooms and break areas
Amenity scopes often change well after the residential drawings are locked. Because our proposals itemize scope and materials, changes show up against a written baseline instead of surfacing at billing.
Why Developers in Apex Work With PMC of NC
Most of the value we add on multifamily work happens before installation starts. The earlier we are involved, the more conflicts we can flag during design and preconstruction, which is where change orders get avoided rather than argued about.
Developers and general contractors work with us because we:
- Provide itemized proposals covering scope, materials, timeline, and cost
- Review construction documents and flag plumbing conflicts early
- Handle permitting and inspection scheduling for our scope
- Coordinate directly with other trades on active job sites
- Carry full licensing and insurance and provide closeout documentation
We are a licensed and insured plumbing contractor and have worked with builders across the Triangle for more than thirty years, including KB Homes, Caruso Homes, and Raleigh Custom Homes.
Service Area Around Apex
Along with Apex, we install multifamily plumbing throughout:
- Cary
- Holly Springs
- Fuquay-Varina
- Raleigh
- Garner
- Morrisville
Apex sits in Wake County, and we work across the full county along with Durham, Orange, Chatham, Alamance, and Harnett counties.
CONTACT US
Request a Multifamily Plumbing Bid in Apex, NC
If you are looking for a multifamily plumbing contractor in Apex for an apartment, townhome, or condominium project, send us your drawings and we will put together a bid.
Contact our team today to request pricing, walk a site, or talk through phasing on an upcoming Apex development.